HomeAdvisor.cc
Home HVAC Duct Cleaning Texas
Duct Cleaning in Texas | Licensed HVAC Contractors | Free Estimates 2026
HomeAdvisor.cc — HVAC

Duct Cleaning
in Texas

Air duct cleaning, sanitizing, and mold treatment. Free estimates from licensed HVAC Contractors in Texas.

$300-800
Avg Project Cost
June-September
Peak Season
Free
Estimates & Diagnosis
24/7
Emergency Service

Local Insight: Texas summers averaging 95°F drive extreme AC demand — 16+ SEER2 systems pay back quickly in this climate

NWS Active Alert — Severe Thunderstorm Warning, Flood Warning: Severe Thunderstorm Warning issued September 10 at 6:55PM CDT until September 10 at 8:00PM CDT by NWS Amarillo TX

Source: National Weather Service · Updated every 10 min

Texas Market: Extreme summer heat and hailstorms make AC failure a statewide emergency

HVAC Permits & Licensing in Texas

Utility

Oncor / CenterPoint Energy serves Texas.

Permits Required

Permits issued by Local city or county building department. Licensed contractors handle all filing and inspections.

Texas Climate & HVAC

Temperature Range

Summers average 95°F, winters 45°F. Extreme temperatures stress HVAC systems requiring proper sizing and installation.

Precipitation

38" annual rainfall. Humidity and precipitation affect system efficiency.

Why Hire Licensed HVAC Contractors in Texas

State Licensed Required

State licensing is required for HVAC contractors. Licensed contractors carry liability and EPA 608 certification for refrigerant work.

Warranty Protection

Manufacturer warranties require licensed installation. Unlicensed HVAC work voids equipment warranties and homeowner insurance.

Rebate Access

Only licensed contractors can file utility rebate applications. Rebates can reduce your cost by $200-$1,500+.

24/7 Emergency

Licensed HVAC contractors provide 24/7 emergency response. AC failures and no-heat emergencies cannot wait.

Counties We Serve in Texas

Get Your Free HVAC Estimate Today

Licensed HVAC Contractors in Texas — fast response, no obligation

Request Free Estimate Call Now

HVAC Cost in Texas

Average project costs in Texas — get free estimates to compare local prices

ServiceLowHigh
AC Repair$150$650
AC Replacement$3000$9000
Emergency AC Repair$250$900
Furnace Repair$150$600
Furnace Replacement$2500$7500
HVAC Installation$5000$12000
Duct Cleaning$300$800
HVAC Maintenance$75$250
Mini-Split Installation$3000$8000
Heat Pump Installation$3500$8000
Indoor Air Quality$500$2500
Smart Thermostat Install$150$500
Boiler Repair$200$800
HVAC Inspection$75$200
Commercial HVAC$5000$25000

Costs vary by location, scope, and materials. Get free estimates for accurate local pricing.

Reviewed by the HomeAdvisor.cc Editorial Team • Pricing data last reviewed July 2026

Winter Heating Emergency Repair | 24/7 Same-Day Service

Common questions about HVAC in Texas

How much does HVAC system replacement cost in Texas?
A complete HVAC replacement in Texas typically costs $300-800. A standard 3-ton central air and gas furnace system with installation runs $7,000–$12,000; high-efficiency systems (18+ SEER) run $10,000–$18,000. Final cost depends on home size, ductwork condition, and equipment brand. Get free estimates to compare local pricing.
How long does an HVAC installation take in ?
A standard HVAC replacement in typically takes 4–8 hours for a like-for-like swap. Adding new ductwork or upgrading from window units to central air takes 1–3 days. Permitting and inspection can add 2–5 business days in Texas, though most contractors handle permit pulls for you.
Do I need permits for HVAC work in Texas?
Yes — Texas requires mechanical permits for HVAC replacement or new installation. Your licensed contractor pulls the permit on your behalf. Required inspections ensure proper refrigerant handling, electrical connections, and ductwork sealing. Unpermitted HVAC work can void equipment warranties and homeowners insurance.
What's the best HVAC system for Texas's climate?
In Texas, a high-efficiency heat pump (18+ SEER, 9+ HSPF) works well for moderate climates; areas with very cold winters benefit from a dual-fuel system pairing a heat pump with a gas furnace. Look for ENERGY STAR certification and a 10-year parts warranty. Ask your contractor about rebates through your local utility — many Texas utilities offer $300–$1,500 for high-efficiency units.
How often should I service my HVAC system in Texas?
Twice-yearly maintenance is standard: tune your AC in spring before peak cooling season and your heating system in fall before first use. In Texas, skipping annual maintenance in a high-demand climate shortens equipment life 3–5 years and can void manufacturer warranties. Most contractors offer maintenance plans for $150–$250/year covering both visits.
What's the difference between HVAC repair and full replacement in ?
If a repair costs more than 50% of a new system or your unit is over 10–15 years old, replacement usually makes more financial sense — especially with higher-efficiency models that lower monthly energy costs. A licensed HVAC contractor in will provide a written estimate for both options so you can compare total cost of ownership.
Why is my energy bill so high in ?
A dirty air filter (replace every 1–3 months), leaky ductwork (can waste 20–30% of conditioned air), or an aging unit running at 30–40% efficiency versus a new unit's 90%+ efficiency are the most common culprits. In 's climate, an oversized or undersized system cycles inefficiently and drives up bills. A proper load calculation (Manual J) ensures your replacement unit is sized correctly.
What questions should I ask before hiring an HVAC contractor in Texas?
Ask: (1) Are you licensed and insured in Texas? (2) Do you perform a load calculation before sizing equipment? (3) What brands and efficiency ratings do you install? (4) Does the estimate include permits and inspections? (5) What warranty do you provide on labor? Avoid contractors who quote over the phone without an in-home assessment.